Upon connection to the battery, a polarity check is made to ensure that the polarity is correct. The digital (LCD) display will show a flashing battery warning sign if the connection polarity is incorrect.

The Oximiser will analyse the initial voltage to determine what charge rate should be applied to ensure a safe/efficient charge.

Repairs damaged batteries automatically during the charging profile, bringing them back to life.
(Not LiFePO4) - (1250, 2000, 5000 Models Only)

To reduce shock to the battery the Oximiser will start by applying a low current, this is used to protect the battery and optimise the bulk charging.

Once safe to do so, the Oximiser will then supply a constant current of 5.0 Amps until the battery is 80-90% recharged.

The charge current will start to drop off when the charge program is nearing 80-90% complete, the charging Amps will continue to drop until the voltage of the battery has reached the desired completion voltage.

After the charging program has been completed, the Oximiser will cut charge and observe the battery to ensure the voltage of the battery is stable.

This will be shown by a solid 100% charged diagram, the Amps will then drop to maintain a set float voltage.